Replacement Head for Reinvo Body: When and How to Replace
By Empowering Your Skin Journey | LED Light Therapy | Published: 2026-10-21
Category: Tips & Care
Learn when to swap the Reinvo Body microdermabrasion head and how to do it properly. Get tips on maintenance and extending device life.
Quick Answer
Replace the Reinvo Body microdermabrasion head every 4–6 weeks or when you notice reduced suction or visible wear. Simply pull off the old head and snap on a genuine replacement.
Why Regular Replacement Matters
The microdermabrasion head is the part of your Reinvo Body device that directly contacts your skin. Over time, the abrasive surface wears down, which reduces exfoliation effectiveness and can even cause uneven pressure. Using a worn head also forces the motor to work harder, potentially affecting suction performance.
A fresh head ensures consistent exfoliation and maintains the device's hygienic operation. Because the head is a single-use part made of plastic and abrasive material, it is not designed to be cleaned and reused indefinitely.
Signs It’s Time for a New Head
You do not need to guess. Look for these clear indicators: reduced suction power during use, visible flattening or smoothing of the white abrasive surface, or a head that feels loose or clicks when attached. If you have been using the same head for six weeks or more, it is likely time to swap it out, even if you do not notice obvious wear.
Frequently Asked Questions
- How do I remove the old head?
- Grip the head firmly and pull it straight off the device. It is held by friction, so no twisting or tools are needed. If it feels stuck, gently rock it side to side while pulling.
- How do I attach the new head?
- Align the new replacement head with the device nozzle and press it on until it clicks into place. Ensure it sits flush and does not wobble before use. The head should feel secure with no movement.
- How often should I replace it?
- For best results, replace the head every 4–6 weeks. If you use the device more than twice per week, consider swapping it every month. Mark your calendar or set a phone reminder.
- Can I clean and reuse the same head?
- No. The microdermabrasion head is designed for single-use over several weeks. Cleaning does not restore the abrasive surface, and reusing a worn head can reduce effectiveness and hygiene. Always use a fresh genuine replacement head.
Product Details
- Replacement head for Reinvo | Body: This replacement head is a genuine Project E Beauty part designed for the Reinvo Body device, white in color, and weighs 0.1 kg. Using a genuine part guarantees a proper fit and reliable performance, avoiding compatibility issues that could affect your treatment.
Replacement head for Reinvo | Body
