Why a Genuine Replacement Head Matters
A fresh microdermabrasion head keeps your Reinvo device working effectively. Over time, the abrasive surface wears down, reducing exfoliation and risking uneven results. Using a genuine replacement head ensures the same fit and function your device was designed for.
The replacement head for Reinvo in Regular size is a genuine Project E Beauty part, so you can swap it with confidence. It's white, lightweight (0.1 kg), and includes one head per package.
What You Get with the Replacement Head
- Replacement head for Reinvo | Regular: Replacement microdermabrasion head in Regular size compatible with Reinvo devices. This confirms the head fits your Reinvo wand without modification, so you can replace the old head and continue your routine.

Replacement head for Reinvo | Regular - Replacement head for Reinvo | Regular: White color, lightweight at 0.1 kg. Includes one head per package. The lightweight design won't add noticeable weight to your device, and a single package gives you exactly what you need for one replacement.
How to Install the Replacement Head
Installing the replacement head is straightforward. Follow these steps for a secure fit.
- Remove the old head: Gently twist and pull the worn microdermabrasion head away from the Reinvo wand. If it resists, check for any locking mechanism or debris on the connection point.
- Align the new head: Take the new Regular replacement head and line it up with the wand's connector. The fit should be snug but not forced.
- Press and twist into place: Push the head onto the wand until it sits flush, then twist gently to lock it. You should feel or hear a slight click when it's secure.
- Test before use: Turn on the device briefly to ensure the head spins or vibrates evenly. If it wobbles or makes unusual noise, re-seat the head.
When to Replace Your Reinvo Head
The catalog does not specify a fixed replacement interval for the Reinvo Regular head. In practice, you may notice the abrasive surface becoming smooth or the device requiring more passes to achieve the same exfoliation. As a general guideline, consider replacing the head after 8–12 uses, or sooner if you treat sensitive areas.
Always inspect the head before each session. If you see cracks, chips, or excessive wear, replace it immediately to avoid skin irritation.
Compatibility and Limitations
This replacement head is designed exclusively for Reinvo devices. It is not confirmed to work with other microdermabrasion wands. The Regular size is intended for general facial exfoliation; if you need a different grit or a body attachment, check your device's original packaging or contact support.
Store the spare head in a clean, dry place away from direct sunlight. Avoid getting the head wet before installation, as moisture can affect adhesion.

